Assembling your rover company raised dog bed is simple, and should only take a few minutes.
Before you start, you should lay out all the pieces of your raised dog bed. You should have:
1 Colored Vinyl Bed Pad
2 Curved Arms (Installed on the Pad Already)
2 Curved Leg Pieces
2 Straight Cross Bars
To start, the arms should already be attached to the nylon pad. These cross pieces can be removed, allowing you to thoroughly clean the bed pad. Place the pad with the top facing down (and the tag facing up).
Connect the straight cross bars to the curved arms by inserting the end of the cross bar into the pre-drilled holes in the curved arm pieces. Attach one side at a time, and you may need to apply some pressure to properly secure it.
Next, connect the curved feet to the arms section. You'll notice that the curved feet have a smaller PVC step-ring that fits nicely inside both of the open ends of theraised dog bed frame. Attach the two pieces, one corner at a time.
The Fully Assembled Raised Dog Bed!
There you have it! Your fully assembled rover company raised dog bed. There are a variety of sizes and colors to choose from, and you can also purchase additional padding for your pampered pet.
We've created the video above to explain how to assemble your dog bed. If you have any additional questions, please call 800-658-5925 or use Our Online Contact Form and we'd be happy to help.
Rover company specializes in high quality Raised PVC Dog Beds and other pet products.
